Spray Foam Insulation in Ontario - Same-Day Service, Done Right the First Time

Fast, Reliable Spray Foam Insulation Across Ontario

Most spray foam insulation jobs in Ontario run between $1,800 and $6,200 depending on square footage, foam type, and how much air sealing your attic actually needs. We serve Ontario with same-day and next-day availability, and a live person answers when you call (361) 315-4177. Our techs know these neighborhoods, the housing stock, and the wind patterns that make Ontario attics behave differently than attics twenty minutes west.

Call (361) 315-4177

Why Laurel Attic Insulation Is Ontario’s Preferred Spray Foam Insulation Company

Ontario homeowners call us because we show up when we say we will. Not a four-hour window. A live, trackable arrival time, sent to your phone before the tech leaves the Inland Empire office. That’s the Relay Visibility Guarantee, and it’s built into every job we run in Ontario.

We’re part of the Relay Home Co. family, founded in 2003, and led by Chase Whitaker. Our techs are background-checked and uniformed. They get photo proof before, during, and after every spray foam job, so you see what was sealed, what was replaced, and what the final application looks like. If something isn’t right, our 365-Day Done Right Promise covers it in writing for a full year.

Material selection matters here. We stock Owens Corning, Johns Manville, and Knauf products, and we match the foam to the job, not to whatever is already on the truck. Ontario’s attic conditions are specific. Our techs plan for them.

Open Cell Spray Foam in Ontario

Open Cell Spray Foam is the most common type we install in Ontario attic floors, where the foam’s job is to seal air leaks and slow heat movement through the ceiling plane. It expands to roughly 100 times its liquid volume, fills gaps around top plates and recessed can lights, and makes a dramatic difference in upstairs bedrooms that won’t hold temperature, which describes a lot of Ontario homes built in the 1960s near Euclid Avenue and Holt Boulevard.

Open-cell costs less than closed-cell. For a typical 1,200 to 1,800 square foot Ontario attic floor, open-cell spray foam runs $1,800 to $3,800. It is not a vapor barrier, which is fine when it’s applied to the attic floor rather than directly under the roof deck.

We pulled the original fiberglass batts from a ranch-style home near Euclid and Holt and replaced them with Icynene open-cell foam. The homeowner had described a whistling sound through the attic during evening Santa Ana gusts and a second-floor bedroom that would not hold temperature. The foam sealed the top plates and the can light penetrations. The whistling stopped that same evening, and that bedroom held temperature through the next wind event.

Where Open Cell Works Best

Ontario attics with accessible floors and vented roofs are ideal for open-cell. The foam goes on the drywall from above, filling the bays and sealing every seam. Cold air and hot air stop moving through the ceiling, and upstairs rooms get noticeably quieter too.

Open Cell for Interior Walls and Plenums

We also use open-cell where sound control matters, like between the garage and a bedroom wall, or around HVAC plenums in Ontario garages. It is not structural, but it stops air movement and cuts the drone from attic-mounted air handlers.

Spray Foam Insulation Contractors in Ontario

Spray Foam Insulation Contractors in Ontario aren’t all the same. Some knock out a job with a single foam type and move on. Our crew from Laurel Attic Insulation does a walkthrough, measures the attic cavity depth, checks ventilation, and writes you a price before any work starts. No door-step surprise. No “it’ll be extra once we open it up.”

For injection work in closed walls or rim joists, Ontario jobs typically run $2,200 to $5,400, and that includes air sealing around the penetrations most contractors skip. If we’re doing a full attic encapsulation with closed-cell on the underside of the roof deck, the price climbs, and we’ll tell you exactly why before we ever suit up.

Some Ontario homeowners ask us to spray the garage ceiling. That’s usually a $900 to $2,400 job, and it makes a real difference when the room above the garage is an office or a bedroom that bakes every afternoon.

What to Ask Before You Hire

Ask whether the contractor will use a thermal barrier over the foam if it’s left exposed. Ask whether they correct attic ventilation before foaming. In Ontario’s older homes near Holt and Euclid, undersized vents are common, and spraying foam over that problem traps heat and shortens the foam’s life. Ask what brand they’re using and why. If they can’t answer, call us instead.

Our Ontario Process

You get a written price first. Then a scheduled arrival window you can track live. Then photo proof after the foam cures. Then a digital invoice you can pay from a link. If anything fails within 365 days, we return and fix it. That’s the done-right promise, and we put it in writing on every Ontario job.

Trusted Brands We Service in Ontario

We install and service spray foam from Owens Corning, Johns Manville, and Knauf. We keep open-cell and closed-cell products on hand for Ontario jobs so we don’t have to order and reschedule when we find unexpected conditions in your attic. Having the right foam available locally means faster turnaround. If we open a wall and find failing foam from another brand, we can remove it and reapply without leaving you without insulation for days at a time.

Common Spray Foam Insulation Problems We See in Ontario Homes

• Santa Ana wind-driven top plate gaps. Ontario’s position at the base of the San Gabriel Mountains means the city catches fierce Santa Ana winds. Those gusts push air through unsealed top plates in older houses, whistling through the attic and dragging dust through ceiling penetrations.
• Delaminated roof deck foam. Open-cell foam applied directly to the underside of roof sheathing without a vapor retarder in Ontario’s hot, dry attic climate drives moisture into the foam. After enough summer heat cycles, the foam delaminates from the sheathing and stops insulating.
• Undersized ventilation in 1960s homes. Houses near Euclid Avenue and Holt Boulevard were built when attic ventilation standards were loose. Spray foam installed without fixing intake and exhaust balance traps heat and shortens the foam’s service life.
• Failed DIY big-box foam kits. Homeowners in Ontario garages try two-component kits on HVAC plenums and can lights. If the two parts aren’t heated to the right temperature during application, uncured pockets remain and crumble within a season. We end up removing and redoing a lot of those.

Pricing for Spray Foam Insulation in Ontario, CA

We Also Serve Cities Near Ontario

Our crews run daily from Montclair to Rancho Cucamonga, and we handle spray foam jobs in Claremont, Upland, and the surrounding Inland Empire. If you’re close to Ontario but not inside city limits, odds are we’re already scheduling in your neighborhood. Spray Foam Insulation in Ontario is our focus, but the crew knows these roads well. For a wider look at what we do, see our full Spray Foam Insulation service page.

FAQs About Spray Foam Insulation in Ontario